Setup Menus

Unisys T27 Settings

This dialog box is displayed by selecting Unisys T27 in the Settings menu.

GeneralSettings

Protocol

Factory default: None

This can be set to None, Poll/Select or Point to Point.

Selecting Poll/Select will enable up to three environments. Only one environment can be enabled when Point to Point is selected.

Tx Number

Factory default: 0

This specifies a sequence of numbers to ensure correct sequencing of messages sent between the Unisys T27 emulation and the host. The valid numbers are as follows:

00None

010/1 no checking

02@/A no checking

030/1 checking

04@/A checking

050/1, with * reset

06@/A with * reset

070-9

080-99

090-999

100-9 with * reset

110-99 with * reset

120-999 with * reset

The * reset option enables the host or the Unisys T27 emulation to resequence by sending an asterisk, for example, after a system failure, to ensure synchronization.

6-61