Getting Started
Connection Timeout (Secs:)
This enables you to specify how many seconds the emulator has to attempt to make a host connection before it either attempts to connect to the next host (if Host Rollover is specified in the Host Connection dialog box) or it issues a Connection Failed mes- sage. The default 0 setting will cause the emulator to use the stack default timeout.
Suppress Echo
When selected, this will will prevent the emulator from generating the Telnet echo option on connection.
Suppress 3270 Regime
When running the IBM 3270 emulation, the setting of this option determines whether or not support for the Telnet "3270 regime" option is suppressed.
Suppress TN3270E
When running the IBM 3270 emulation, the setting of this option determines whether or not support of TN3270E is suppressed. When this option is not selected (i.e. TN3270E is not suppressed), additional options are available by clicking the 3270 Options button. These are described in the TN3270 Options section.
Suppress TN5250E
When running the IBM 5250 emulation, the setting of this option determines whether or not support of TN5250E is suppressed. When this option is not selected (i.e. TN5250E is not suppressed), additional options are available by clicking the 5250 Options button. These are described in the TN5250 Options section.
Force Negotiation
These settings determine whether or not the Telnet Binary or EOR options are sup- ported. Both are set to no by default.
No Will not force any negotiations. It will leave it up to the host to decide what to do.
DO Will force negotiation. The host will be informed that the option is supported.
DONT Will force negotiation. A negotiation packet will be sent to the host telling it that the option is not supported.
Break Settings
The setting of these options determine whether or not a timing mark (TM) and/or carriage return (CR) is sent with a Telnet break packet. A timing mark is sent by de- fault.