HP NX6120 manual Removing a Mini PCI Communications Card

Removal and Replacement Procedures

4.Disconnect the auxiliary and main 1 antenna cables from the Mini PCI communications card.

✎Make note of which antenna cable is attached to which antenna clip on the Mini PCI communications card before disconnecting the cables.

5.Spread the 2 retaining tabs 2 on each side of the Mini PCI socket to release the Mini PCI communications card. (The edge of the card opposite the socket rises away from the notebook.)

6.Remove the Mini PCI communications card by pulling the card away from the socket at a 45-degree angle 3.

✎Note that the Mini PCI communications card is slotted 4 to prevent incorrect installation.

Removing a Mini PCI Communications Card

Reverse the above procedure to install a Mini PCI communications card.

5–16 Maintenance and Service Guide