Removal and Replacement Procedures

2.Position the notebook with the rear panel toward you.

3.Disconnect the USB cable 1 and audio cable 2 from the system board.

✎The USB cable is present only on full-featured models.

4.Remove the PM1.5×3.0 screw 3 that secures the USB/audio board and shield to the base enclosure.

5.Remove the cables from the clips 4 in the base enclosure.

6.Remove the USB/audio board 5.

Removing the USB/Audio Board

Reverse the above procedure to install the USB/audio board.

Maintenance and Service Guide

5–51