Removal and Replacement Procedures
5.24 Serial Connector Module
✎This section applies only to
Serial connector module (includes serial connector | |
module cable) |
|
|
|
1.Prepare the notebook for disassembly (Section 5.3), and then remove the following components:
a.Bluetooth board (Section 5.5)
b.Optical drive (Section 5.8)
c.Keyboard (Section 5.9)
d.Switch cover (Section 5.10)
e.Fan (Section 5.12)
f.Heat sink (Section 5.13)
g.Modem board (Section 5.15)
h.Display assembly (Section 5.18)
i.Top cover (Section 5.19)
j.Speaker (Section 5.20)
k.Digital media board (Section 5.21)
l.USB/audio board (Section 5.22)
m.System board (Section 5.23)
2.Turn the base enclosure upside down with the rear panel toward you.
Maintenance and Service Guide |