Removal and Replacement Procedures

g.Remove the 2 PM2.5×4.0 hard drive frame shoulder screws 1 from each side of the hard drive.

h.Remove the 2 PM2.5×4.0 hard drive frame screws 2 from each side of the hard drive.

i.Remove the 2 PM1.5×3.5 hard drive frame screws 3 from the front of the hard drive.

j.Lift the frame straight up 4 to remove if from the hard drive.

k.Remove the hard drive connector 5 from the hard drive.

Removing the Hard Drive Frame and Connector

Reverse the above procedure to install and reassemble the hard drive.

Maintenance and Service Guide

5–9

Page 93
Image 93
HP NX6120 manual Removing the Hard Drive Frame and Connector