display command in lanadmin LAN Interface Test Mode. A description of each field follows the display.
LAN INTERFACE STATUS DISPLAY
Tue , Aug 20,1996 11:45:17 | |
Network Management ID | = 5 |
Description | = lan3 |
| |
Hw Rev 0 |
|
Type (value) | = |
MTU Size | = 1500 |
Speed | = 100000000 |
Station Address | = 0x80009d40d69 |
Administration Status (value) | = up(1) |
Operation Status (value) | = down(2) |
Last Change | = 0 |
Inbound Octets | = 0 |
Inbound Unicast Packets | = 0 |
Inbound | = 0 |
Inbound Discards | = 0 |
Inbound Errors | = 0 |
Inbound Unknown Protocols | = 0 |
Outbound Octets | = 0 |
Outbound Unicast Packets | = 0 |
Outbound | = 0 |
Outbound Discards | = 0 |
Outbound Errors | = 0 |
Outbound Queue Length | = 0 |
Specific | = 655367 |
| |
Index | = 3 |
Alignment Errors | = 0 |
FCS Errors | = 0 |
Single Collision Frames | = 0 |
Multiple Collision Frames | = 0 |
Deferred Transmissions | = 0 |
Late Collisions | = 0 |
Excessive Collisions | = 0 |
Internal MAC Transmit Errors | = 0 |
Carrier Sense Errors | = 0 |
Frames Too Long | = 0 |
Internal MAC Receive Errors | = 0 |
86 | Appendix A |