Understanding the Functions

Command Settings

Reference

Name of Function

Page

Command

Page 33

This specifies the commands and conditions that are transferred from the computer. The following commands are sup- ported:

•RTL-PASS:

•MH-GL, GL2 (MH-RTL): Mutoh MH-GL/MH-GL/2 (MH-RTL) commands (conform to Hewlett- Packard HP-GL, HP-GL/2 (HP-RTL) commands)

• MH-GL2 (MH-RTL):

Mutoh MH-GL/2 (MH-RTL) commands

 

(conform to Hewlett-Packard HP-GL/2

 

(HP-RTL) commands)

(MH-GL, GL2 printing unit is 0.025 mm)

Plot Area

Page 34

This specifies environmental functions for the printer. It specifies the printing area (hardclip area) for the media size.

•Normal: Specifies the standard printing area for RJ-6000 Series printers

Distance from edges of media:

Cut sheet - Front 25 mm, Back 20 mm, Sides 10 mm Roll media - Front 25 mm, Back 20 mm, Sides 10 mm

•Expanded: Specifies a printing range for the RJ-6000 printer that is interchangeable with Mutoh XP Series pen plotters.

However, since the maximum printing range is 1351.6 mm for

a54-inch printer and 1554.8 mm for a 62-inch printer, if expanded mode is specified with media wider than 1361.6 mm for a 54-inch printer, or 1564.8 mm for a 62-inch printer, the left and right margin shown below will be differed.

Distance from edges of media:

Cut sheet - Front 25 mm, Back 20 mm, Sides 5 mm Roll media - Front 25 mm, Back 20 mm, Sides 5 mm

(media width 54 inch: 1361.6 mm or less, 62 inch: 1564.8 mm or less)

22

RJ-6000 Series USER GUIDE Functions Edition