Memory Extension
Standard internal memory for the
1)but this can be extended by fitting an additional 16 MB (SIM16M) or 32 MB (SIM32M) memory chips (sold separately).
The following procedure explains how to install extended memory.
CAUTION
•The power to the printer must be switched off and the power cord removed before the additional memory is installed.
Step 1
Remove roll media and scroller from the printer. Undo the three screws holding the board box on the printer main unit and carefully lower the board box. Remove two thumb screws to reveal the memory slot.
Board Box Fastening Screws
CAUTION
•Electronic components are susceptible to damage by static electricity. Remove static charge from your clothes and body by touching your hands to the board box before you touch the additional memory chip.
•Dust in the slot may cause damage. Blow it out with an air duster before installing the additional memory.
Step 2
The optional memory chip to be added should be inserted in slot 2 on the lower right of the board with the nicked end of the chip at the right hand end of the slot.
82 |