Command Settings: Terminator
P l o t O K
* M e n u * C o m m a n d >
*M e n u * C o m m a n d >
C o m m a n d : M H G L , G L 2
T e r m i n a t : | S p e c i a | l | ||
T e r m i n a t : |
|
|
| |
| N o r m a | l | ||
R e s o l u t . : |
|
| ||
| 3 6 0 d p i | |||
* M e n u * | C o m m a n d > | |||
P l o t O K |
|
|
|
|
Step 1
If a menu is to be specified, press the [MENU] key.
Step 2
The key contents change to the purple section on the outside of the control panel.
Bring up the "Command" menu by pressing the [Menu Up] key or [Menu Down] key.
Step 3
Press the [ENTER] key to confirm the "Command" menu and shift to the next level.
Step 4
Bring up the "Terminat" item by pressing the [Menu Up] key or [Menu Down] key.
Step 5
Press the [VALUE +] or [VALUE
Step 6
Press the [ENTER] key to confirm "Terminat" and shift to the next item to be set.
Step 7
If no other items are to be changed, press the [Back] key.
Step 8
Do not press any other keys for 3 minutes or press [Back] key again.
Step 9
The permanent display is restored.
36 |