A messaged error impedes the operation of the printer. Sometimes an error is displayed and printing continues or printing may cease when an error is dis- played. If printing stops, it will be reprinted when the cause of the error is removed.
When a messaged error occurs, the beeper will beep twice unless there is insufficient memory.
Capping position not set
N o C a p P o s i t i o n
The capping position is not recorded. The error will not be cancelled until the capping position is adjusted. Contact your local Mutoh dealer regarding capping position adjustment.
Media recognition error
U n d e f i n e d P a p e r
An error has occurred during media detection.
Either media smaller than the minimum size or larger than the maximum size was detected or the hold lever was up or a media jam occurred during media detection. This error also occurs if the media is not loaded in the correct posi- tion. Put the hold lever up and reload the media.
(See Basic Edition page 38, 41)
Media skew error
P a p e r S l a n t | Roll media has slipped obliquely. | |
Reload the media. | ||
| ||
| (See Basic Edition page 41) | |
Media replacement error |
| |
P a p e r C u t E r r o r | Roll media cutting failed. Cut the | |
media, raise the hold lever and reload | ||
| ||
| the media. | |
| (See Basic Edition page 41) |
88 |