Network Interface Board Installation

CAUTION

•Electronic components are susceptible to damage by static electricity. Remove static charge from your clothes and body by touching your hands to the board box before you touch the network interface board.

Step 3

Fasten the two interface mounting screws.

Step 4

Connect a Category 5 Ethernet cable compatible with both 10BASE-T and 100BASE-TX to the connector on the interface board. Connect the other end of the Ethernet cable to the 10BASE-T or 100BASE-TX network hub.

10BASE-T/100BASE-TX Compatible Ethernet Cable (Category 5)

Options of Installation

RJ-6000 Series USER GUIDE Functions Edition

81