Utility Settings: Dump
P l o t O K
* M e n u * C o m m a n d >
* M e n u * | U t i l i t y > | ||
|
| ||
E r | r o r D i s p l a y : | O f f | |
|
| ||
D u m p : | S t a r t / E n d | ||
|
|
| |
D u m p : |
| A l l | |
* | * D u m p M o d e * * | ||
* | * D u m p M o d e * * | ||
* M e n u * | U t i l i t y > | ||
Step 1
If a menu is to be specified, press the [MENU] key.
Step 2
The key contents change to the purple section on the outside of the control panel.
Bring up the "Utility" menu by pressing the [Menu Up] key or [Menu Down] key.
Step 3
Press the [ENTER] key to confirm the "Utility" menu and shift to the next level.
Step 4
Bring up the "Dump" item by pressing the [Menu Up] key or [Menu Down] key.
Step 5
Select "Start/End" or "All" by pressing the [Menu Up] key or [Menu Down] key.
Step 6
Press the [ENTER] key to confirm Dump mode.
Step 7
Send printing data from the host com- puter. print with Dump Mode.
Step 8
To terminate Dump Mode, press the [CANCEL] key.
Step 9
Do not press any other keys for 3 minutes or press [Back] key again.
70 |