Command Settings: Command
P l o t O K
* M e n u * C o m m a n d >
*M e n u * C o m m a n d >
C o m m a n d : M H G L , G L 2
C o m m a n d : R T L - P A S S
P l o t A r e a : N o r m a l
* M e n u * C o m m a n d >
P l o t O K
Step 1
If a menu is to be specified, press the [MENU] key.
Step 2
The key contents change to the purple section on the outside of the control panel.
Bring up the "Command" menu by pressing the [Menu Up] key or [Menu Down] key.
Step 3
Display a Command item by pressing the [Menu Up] key or [Menu Down] key.
Step 4
Specify “MHGL, GL2”,
Step 5
Press the [ENTER] key to confirm "Command" setting and shift to the next item to be set.
Step 6
If no other items are to be changed, press the [Back] key.
Step 7
Do not press any other keys for 3 minutes or press [Back] key again.
Step 8
The permanent display is restored.
Parameters Set to How
33 |