Function Settings: Cut Position
P l o t O K
* M e n u * C o m m a n d >
* M e n u * F u n c t i o n >
I n k D r y T i m e : |
| 3 0 s |
|
| |
C u t P o s . : | D a t a | |
|
|
|
C u t P o s . : S t a n d a r d
M e d i a C u t : A u t o
* M e n u * F u n c t i o n >
P l o t O K
Step 1
If a menu is to be specified, press the [MENU] key.
Step 2
The key contents change to the purple section on the outside of the control panel.
Bring up the "Function" menu by pressing the [Menu Up] key or [Menu Down] key.
Step 3
Press the [ENTER] key to confirm the "Function" menu and shift to the next level.
Step 4
Bring up the "Cut Pos." item by pressing the [Menu Up] key or [Menu Down] key.
Step 5
Press the [VALUE +] or [VALUE
Step 6
Press the [ENTER] key to confirm "Cut Position" and shift to the next item to be set.
Step 7
If no other items are to be changed, press the [Back] key.
Step 8
Do not press any other keys for 3 minutes or press [Back] key again.
Step 9
The permanent display is restored.
48 |