Configuring gated
Troubleshooting gated
Interface Configuration Without strictintfs Option Specified The following configuration references a
traceoptions "tt" general; interfaces {
interface lan0 lan1 lan3 passive ;
} ;
rip yes ;
The following is the tracing output that is produced when gated is started with this configuration:
trace_on: Tracing to "/tt" started
Tracing flags enabled: general
inet_routerid_notify: Router ID: 15.13.119.134
You can also find the results of this same command in the gated_dump file. In the following segment of a gated_dump file, the interface is listed as passive in the interface policy statement toward the end of this example:
Interfaces:
lo0 | Index 1 | Change: <> | State: <Loopback> |
| Refcount: 2 | ||
| 127.0.0.1 |
|
|
| Metric: | 0 | MTU: 4072 |
|
| Refcount: 4 | Preference: 0 | Down: 120 | |
| Change: <> | State: <Up Loopback Multicast> | ||
| Subnet Mask: 255.255.255.255 |
| ||
| proto: | RIP | State: <NoIn NoOut> | |
lan0 | Index 2 Address | 802.2 8:0:9:1b:da:1f | Change: <> | |
State: <> |
|
|
| |
| Refcount: 2 |
| ||
| 15.13.119.134 |
|
|
|
| Metric: | 0 | MTU: 1436 |
|
| Refcount: 6 | Preference: 0 | Down: 120 | |
| Change: <> | State: <Up Broadcast Multicast | ||
NoAge> |
|
|
|
|
| Broadcast Address: 15.13.119.255 | |||
| Subnet Number: 15.13.112 | Subnet | ||
Mask: 255.255.248 |
|
|
| |
Chapter 3 | 105 |
