HP Routing Services -UX 11i v2 manual Configuring the Ospf Protocol

Configuring gated

Configuring the OSPF Protocol

value can be an unsigned 31-bit number. You can also specify tag as as_tag, where as_tag is an unsigned 12-bit number that is automatically assigned.

•type determines how ASE routes imported into OSPF are treated. Type 1 routes must be routes from internal gateway protocols with external metrics that are directly comparable to OSPF metrics.

When OSPF selects a route, OSPF uses the type 1 route’s external metric and adds the OSPF internal cost to the AS border router. Type 2 routes must be routes from external gateway protocols with metrics that are not comparable to OSPF metrics. When OSPF selects a route, OSPF ignores a type 2 route’s metric and uses only the OSPF internal cost to the AS border router.

Default: 1

•exportlimit specifies the rate at which ASE routes are imported into the gated routing table for each exportinterval.

Default: 100 (ASE routes)

Range: 0 – 65535

•exportinterval specifies the interval (in seconds) between ASE exports into OSPF.

Default: 1 (second)

Range: 0 – 2147483647

82 Chapter 3