NOTE
NOTE
NOTE
Configuring gated
Configuring the OSPF Protocol
Default: None (you must specify a value)
Range: Integer between 0 – 255
The hellointerval value must be the same for all OSPF routers.
•routerdeadinterval specifies the time interval (in seconds) for which the Hello packets are not received from a router before it is considered down or inactive by its neighbors. This value must be a multiple of the hellointerval value.
Default: None (you must specify a value)
Range: 0 – 65535
The routerdeadinterval value must be the same for all OSPF routers.
•You can use the password authkey to validate the protocol packets received on the router interface. The value can be 1 to 8 decimal digits separated by periods, a
Default: None
Range: Up to 8 bytes
To set an authkey value, you must set the authtype clause to 1 or simple for the area. See “Authentication” on page 77 for more information on using OSPF authentication.
Chapter 3 | 69 |
