Configuring gated
Troubleshooting gated
Normally, gated deletes the route configured in the /etc/rc.config.d/netconf file. To solve this problem, configure a static default route as described in the section “Installing Static Routes” on page 90.
Another common scenario occurs in networks where all the gateways do not implement the gated routing protocols. In this situation, routes that do not use gated gateways are not confirmed by gated, and gated deletes them unless a static statement is included in /etc/gated.conf:
static {
13.0.0.0 mask 0xff000000 gateway 15.14.14.14 ;
};
The static entry in this example ensures that the local system includes a route to network 13.0.0.0 even though the gateway to that network (15.14.14.14) is not running any of the gated protocols.
You can include the restrict clauses in the export statements to restrict these extra routes from being advertised.
Problem 3: gated adds routes that appear to be incorrect.If gated adds routes that appear to be incorrect, track the original source of the route by completing the following steps:
1.Start by looking at the routing table maintained by gated.
2.Send gated a SIGINT signal, and look at the information output in the /var/tmp/gated_dump file.
3.Look for the entry of the route in question. The entry identifies the protocol over which this route was heard and the
Perform one of the following actions:
•If the route was learned over RIP, use /usr/sbin/ripquery to query the
•If the
Chapter 3 | 107 |