HP Routing Services -UX 11i v2 manual Range 0, Non-Broadcast Router Interface Example

Configuring gated

Configuring the OSPF Protocol

specified by the routerdeadinterval definition). The value of pollinterval must be larger than the value of hellointerval. A sample value for an X.25 network is 2 minutes.

Default: None (you must specify a value)

Range: 0 – 255

•routers specify the list of routers attached to the non-broadcast network. Routers are defined by their IP interface addresses. You must define the routers that are eligible to be designated routers as eligible.

Figure 3-7 shows an example of a router (A) that is connected to an NBMA network through the interface 193.2.1.35. Two other routers are also attached to the network: router B is connected through the interface

193.2.1.33and C is connected through the interface 193.2.1.46. B and C are eligible to be designated routers.

Figure 3-7 Non-Broadcast Router Interface Example

Router

A

Network

Router

B

Network

193.2.1.35

193.2.1.33 Internet 193.2.1.46

Network

Router

C

Network

The following is an example of the non-broadcast interface definition in router A’s /etc/gated.conf file:

Chapter 3 71