Navigation Quick Start

The Travel Companion can be used as a GPS navigation system right out of the box. The sections that follow provide instruction to prepare and use the Travel Companion immediately after purchase.

CAUTION Drive with due care and attention when using the Travel Companion for navigation.

Installing the Battery

The battery provides power for the Travel Companion to operate. The Travel Companion comes with a mini-USB synchronization cable, which you must use with a power adapter to charge the device.

To install the battery:

1.Turn the Travel Companion over so you can see the back battery cover.

2.Press the battery release button (1).

3.Slide the battery compartment cover down about 1/2 inch, and then lift the cover off the Travel Companion (2).

4.Insert the battery into the compartment (1) so that the connectors on the battery mate with the pins in the battery compartment, and then press down until the battery locks into place (2). As you insert the battery, be sure to pull the battery removal tab out so it is on the outside of the battery.

8

Page 14
Image 14
HP rx5900 manual Navigation Quick Start, Installing the Battery