Position and eject options

The sheet-fed printing option Position/Eject, on the Printer Options menu, enables you to control how images are positioned and whether the automatic sheet eject feature is enabled. By selecting Auto Eject Off, you can save media by combining print jobs that are smaller than the sheet size onto the same sheet, instead of on separate sheets. In this mode, you can print the jobs one after the other, or “nest” them across the width of the media in rows. Position/Eject is available when the printer is configured for sheet-fed media.

●Position options — for print jobs with a width that is less than the width of the media, you can control where the image is positioned (flush left, flush right, centered, or nested).

●Eject options — for sheet fed jobs, you can control whether the media is ejected after each job to the output side, input side, or not automatically ejected (Auto Eject Off).

●Nested output — when you set Eject to Auto Eject Off, and Position to Nested, the print jobs are nested onto the media until all jobs are printed or there is no more room on the sheet.

Figure 4-2Position options with Auto Eject Off

ENWW

Position and eject options 25