4.Push the lamp bulb to one side slightly (against the spring), and lift it from the lamp housing. Figure 9-7Removing the bulb

Material disposal: mercury lamps

This HP product contains the following materials that might require special handling at end-of-life: Mercury is present in the UV lamps. Disposal of mercury can be regulated because of environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance (EIA) (http://www.eiae.org).

Install the new UV lamp bulbs

1.Insert the replacement bulb into the lamp housing, pressing it to the left, and then down into place.

Figure 9-8Installing the bulb

2.Tighten the two screws that hold the reflectors together (see Figure 9-6 Reflector screws on page 63 for screw locations).

64 Chapter 9 User cleaning

ENWW