Figure 9-19Location of carriage wheels

A

D

E

B C

1.Raise the rail by selecting the following from the printer’s control panel: System page > Tools > User Cleaning and Maintenance > Clean Carriage Wheels.

2.Press Proceed to continue.

The rail and the output roller will raise to the maximum height. You can move the carriage to any position on the rail that is convenient for cleaning.

3.Clean the top service-end wheel by placing an IPA (Isopropyl alcohol) moistened cotton swab against the side of the wheel (A in photo below) and moving the carriage back and forth about 10 cm (4 in).

Figure 9-20Location of carriage wheels

74 Chapter 9 User cleaning

ENWW