2.Remove the four sliver screws (A and B in the following figure) that secure the lamp housing to the lower lamp assembly.

Figure 9-3User end screws

B

B

A

A

3.LIft up to remove the lamp housing from the printer.

Remove the service-end lamp housing

1.Disconnect the auxiliary cable from the top of the service-end lamp. See Figure 9-1 Disconnect the user-end auxiliary cable on page 60 for location.

2.Remove the lamp power cable from the side of the lamp housing by turning the coupling counterclockwise. See Figure 9-2 Remove the user-end power cable on page 60 for location.

ENWW

Replace UV lamp bulb (500–1000 hours) 61