Media Settings menu

To display the Media Settings menu, press Settings on the Media page.

●General Media Settings — Media Name, Media Feed Method, Visible to Printer, Vacuum Control, Media Roller Use, Media Weight. For instructions, see Configure media on page 9.

●Print Speed Specific Settings — Printing Delay, Lamp Mode. For instructions, see Media Wizard on page 9.

Ink page

Figure 6-5 Ink page

￿

￿￿

￿

To switch to the Ink page, press the Ink icon in the Activity Tray at the bottom of the screen.

1Ink levels and status — displays the amount of ink remaining in a bar graph and numerical display, the capacity of the ink supply, and ink status.

2Check Jet Health — fires all jets by printing a test pattern. This is a good way to inspect and prepare the jets for printing after they have been idle.

3Purge — purges the printheads to help recover missing jets. You can purge all colors or any combination of colors, Standard or enhanced Performance purges, and print a prime bars pattern to see whether jets are recovered after each purge.

4Maintenance — displays the Maintenance menu (see Maintenance menu on page 35).

Maintenance menu

●Check Jet Health — prints a test pattern that shows working and non-working jets.

●Perform An Air Purge — purges the printheads with air to clear ink clogs. You can select the printheads to purge, and whether to perform a Standard or Performance purge (the Performance purge is more effective but expels more ink).

ENWW

Ink page 35