![](/images/new-backgrounds/1213382/21338239x1.webp)
CAUTION: To prevent possible server malfunction or damage to the equipment, be sure to completely close the processor locking lever.
7.Install the heatsink and the heatsink fan. For more information, see the server installation sheet.
8.Install the access panel.
SAS or SATA hard drive options
Some HP ProLiant 100 Series servers support SAS and SATA drives depending on the controller configuration.
ProLiant server | SATA support | SAS support | Maximum drives |
|
|
|
|
ProLiant ML110 G4 and G5 Servers | Embedded | Optional HBA | 4 |
|
|
|
|
ProLiant ML115 and ML115 G5 | Embedded | Optional HBA | 4 |
Servers |
|
|
|
ProLiant ML150 G3 Server | Embedded | Optional HBA | 6 |
|
|
|
|
ProLiant ML150 G5 Server | Embedded | Optional HBA | 8 |
|
|
|
|
For optimal performance, avoid mixing SAS and SATA hard drives.
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays are populated with either a component or a blank.
IMPORTANT: If only one hard drive is installed, install it in the bay with the lowest device number. For device numbering and drive installation guidelines, refer to "SAS and SATA hard drive guidelines (on page 59)."
IMPORTANT: Some ProLiant 100 Series servers support
To install the component:
1.Power down the server (on page 6).
2.Open the bezel, if applicable.