5.Install the hard drive.

6.Close the bezel.

7.Resume normal server operations.

8.Determine the status of the drive from the hot-plug SAS hard drive LED combinations ("SAS and SATA hard drive LED combinations" on page 60).

Hard drive LED cable option

This section provides the following procedures:

•Installing the LED cable (ML110 G4) (on page 24)

•Installing the LED cable (ML150 G3) (on page 27)

•Installing the LED cable (ML110 G5, ML115 G5, and ML150 G5) (on page 29)

Hardware options installation 23