When you look at the Summary Settings page, you will notice that a grid is displayed with a description of a chart in the grid, as shown in the following figure. The grid on the Summary Settings page corresponds to the grid on the Summary tab in Backup Manager. To change a chart, select a grid on the Summary Settings page and change the settings as described in the steps in this section.

The top four grids on the Summary Settings page correspond to the top four charts on the Summary tab. Just as the lower four grids on the Summary Settings page correspond to the lower Summary tab. You may notice though that by default only two charts are shown in the bottom half of the Summary tab. You may have also noticed that there are two empty grids by default on the Summary Settings page. The Summary Settings page displays two empty grids because the lower two charts span across two grids.

Figure 54 Summary Settings for Backup Manager Charts

You can also modify the Summary tab instantly by clicking one of the buttons displayed in the Summary Settings page. These buttons are described in the following table.

Table 60 Buttons on the Summary Settings Page

Button

Description

 

 

Clear All

Clears all the Summary Settings page of all the charts.

 

 

Clear

Clears the Summary Settings page of the selected chart.

 

 

Revert

Reverts the Summary Settings page to the previous setting.

 

 

Defaults

Reverts the Summary Settings page to the default setting.

 

 

To modify charts displayed on the Summary tab in Backup Manager:

1.Access Backup Manager as described in ”Accessing Backup Manager” on page 351.

2.Click the icon.

3.To change the title for the summary page, type a new title in the Title field.

4.Select a grid. The grid corresponds to where the chart will appear on the screen.

372 Managing Backups