2.Click the Utilization tab.

3.To view a utilization report, click one of the reports listed in the tree, as shown in the following figure.

Figure 80 Viewing a Utilization Report

The report appears in the right pane.

Printing Elements in Capacity Manager

The software lets you print the topology in Capacity Manager. For example, you can provide a printout to upper management that shows not only the topology of the network, but also the capacity of each element.

To print the elements in Capacity Manager:

1.Access Capacity Manager as described in ”Accessing Capacity Manager” on page 517.

2.If the topology spans more than one screen, arrange the elements so they are closer together,

preferably on one screen. To move an element, click the button and then the element you want to move. Drag the element to its new location. Moving elements closer together prevents the printout from appearing too stretched.

3.Click the button.

4.Use the fields on the Paper tab to modify the setup of the page. When you are done, click Apply. If you want the default settings, click Default.

A preview of the printout is displayed in the right pane.

IMPORTANT: Before you change the margins, decide on a unit of measurement.

•Paper format - Select the paper size from the drop-down menu.

•Unit - Select cm (centimeters) or inch for the margins.

•Paper width - Displays the width of the paper. You can modify the measurement in this field when you select the Custom option in the Paper format drop-down menu.

•Paper height - Displays the height of the paper. You can modify the measurement in this field when you select the Custom option in the Paper format drop-down menu.

•Top margin - Type a measurement for the top margin.

•Bottom margin - Type a measurement for the bottom margin.

•Left margin - Type a measurement for the left margin.

524 Finding an Element’s Storage Capacity