HP T1000 G3, T1000J, T1500 G3, T750J Replace the metal battery cover Replace the UPS front bezel

INSTALLATION

3Slide up and remove the metal battery cover (see Figure 3). Do not remove any screws.

NOTE: For HP T750 G2, HP T750J, and HP T1000 G3 models, carefully remove the metal battery cover to avoid damaging the battery disconnect blades.

HP T750 G2 HP T750J, and HP T1000 G3

HP T1000J

HP T1500 G3, and

HP T1500J

Figure 3 Removing the Battery Cover

4Remove the protective label from the internal battery connector (see Figure 4).

Figure 4 Removing the Protective Label

5Connect the red wire to the positive ()) battery connector (see Figure 5).

NOTE: A small amount of arcing may occur when connecting the batteries. This is normal and does not damage the unit or present any safety concern.

Figure 5 Connecting the Internal Battery Connector

6Replace the metal battery cover.

7Replace the UPS front bezel.

HP T750 G2, HP T750J, HP T1000 G3, HP T1000J, HP T1500 G3, and HP T1500J UPS Models User Guide S 505922-002 5