Section 2
Getting Started
Loading the Battery
Before using the camcorder, you must load the
1. Slide the latch at the bottom to remove cover.
2. Insert the battery following to the correct polarity marks ( + or
3. Replace the battery cover.
Note
•When the battery is absent, the date and time will be reset.
Charging the Battery
For optimal flexibility, this camcorder can be recharged using the USB port of most PCs/laptops or with the AC adapter provided in the packaging.
Recharging from a PC/Laptop USB port
1.Be sure the PC or Laptop is powered up before beginning. Connect the camcorder to the PC/Laptop
USB port using the provided USB cable as illustrated below.
2.This should display the [PC Mode] and [Charge Mode]menu on the camcorder LCD. Use the Tele/
Wide buttons ( / | ) to highlight [Charge Mode]. |
3.Press the Record/OK button ( ) to select the option. Shortly after, the camcorder will display a charging battery icon on the LCD. The LCD will turn off after 3 seconds.
4.Please allow 5 to 9 hours for a full charge. After charging, disconnect the camcorder from the USB cable for normal use.
Press OK Key
5
EN
