
8. How to display the measurement results
The HDMI signal timings can be measured and the InfoFrame and other data can be decoded and displayed by pressing the ANALYZE button. The area of the menu where the measurement results are displayed is structured as shown below.
TOP
Press F1 ( F2 , F3 or F4 ) + SHIFT .
ANALYZE |
|
|
| |
ERROR | DETAILS | Input Video Timing | Input Video Timing measurement results | |
REPORT | ||||
|
|
| ||
Error table display |
| AVI InfoFrame | AVI InfoFrame measurement results | |
|
| SPD InfoFrame | SPD InfoFrame measurement results | |
|
| Audio InfoFrame | Audio InfoFrame measurement results | |
|
| MPEG InfoFrame MPEG InfoFrame measurement results | ||
|
| ACP Packet | ACP Packet measurement results P. △△ | |
|
| ISRC1 Packet | ISRC1 measurement results | |
|
| ISRC2 Packet | ISRC2 measurement results | |
|
| Channel Status Bit Channel Status Bit measurement results | ||
|
| Audio Timing | HDMI Audio measurement results | |
|
| HDCP | HDCP constant measurement results | |
|
| DDC Monitor | DDC Line Monitor display |
8.1ERROR Report
TOP → ANALYSIS [ANALYZE]
This operation sequence is used to list any errors in any the measurement items.
8.2VIDEO TIMING VIDEO TIMING
TOP → ANALYSIS [ANALYZE] → DETAILS [F1] → Video Timing [F1] This operation sequence is used to measure the input timings.
28