HP Veritas Volume Manager 5.0 -UX 11i v3 manual Creating a volume with a version 20 DCO volume

252Creating volumes

Creating a volume with a version 20 DCO volume

Creating a volume with a version 20 DCO volume

To create a volume with an attached version 20 DCO object and volume

1Ensure that the disk group has been upgraded to the latest version. Use the following command to check the version of a disk group:

#vxdg list diskgroup

To upgrade a disk group to the most recent version, use the following command:

#vxdg upgrade diskgroup

For more information, see “Upgrading a disk group” on page 208.

2Use the following command to create the volume (you may need to specify additional attributes to create a volume with the desired characteristics):

#vxassist [-gdiskgroup] make volume length layout=layout \ logtype=dco dcoversion=20 [drl=onsequentialoff] \ [ndcomirror=number] [fastresync=on] [other attributes]

Set the value of the drl attribute to on if dirty region logging (DRL) is to be used with the volume (this is the default setting). For a volume that will be written to sequentially, such as a database log volume, set the value to sequential to enable sequential DRL. The DRL logs are created in the DCO volume. The redundancy of the logs is determined by the number of mirrors that you specify using the ndcomirror attribute.

By default, Persistent FastResync is not enabled on newly created volumes. Specify the fastresync=on attribute if you want to enable Persistent FastResync on the volume.

For more information, see the vxassist(1M) manual page.

Note: See “Determining the DCO version number” on page 277 for details of how to determine the version number of a volume’s DCO.

Creating a volume with dirty region logging enabled

Note: The procedure in this section is applicable to volumes that are created in disk groups with a version number of less than 110. To enable DRL or sequential DRL on a volume that is created within a disk group with a version number of 110 or greater, follow the procedure described in “Creating a volume with a version 20 DCO volume” on page 252, which creates the DRL logs within the plexes of a version 20 DCO volume.