Installation and Setup
Turning On and Off
This section provides the following instructions:
■“To connect power” on page 23
■“To turn the projector on” on page 24
■“To turn the projector off” on page 25
■“To operate the remote control” on page 25
■“To reset the projector” on page 26
To connect power
1.Connect one end of the power cord to the back of the projector 1 and the other end to an electrical outlet 2.
2.Turn on the main disconnect switch 3 on the back of the projector.
✎Toposition.maintain network connectivity, the main disconnect switch must remain in the on
Reference Guide | 23 |