System Management
To set basic projector properties
1.On a networked computer, open an internet browser, enter the IP address of the projector in the URL bar, and press Enter. See “To find the IP address” on page 53 for more information.
2.Depending on the property you want to view or change, go to the location indicated in the following table.
3.Make any necessary changes and click Apply.
Changing Projector Properties
Projector Property | Location in Web Interface |
|
|
Status | Home > Device Info |
|
|
Web interface language | Home > Select Language |
|
|
Picture and audio* | Projector |
|
|
Basic network configuration* | Networking > TCP/IP (or Wired Settings |
| on certain models) |
|
|
Advanced network configuration | Networking |
*These properties are also available in the
54 | Reference Guide |