Maintenance

6.Close the lid.

7.Turn on the projector. If the lamp does not turn on after the warm-up period, try reinstalling the lamp again.

8.Open the on-screen menu and select setup > Reset lamp hours.

ÅWARNING: The lamp contains a small amount of mercury. If the lamp breaks, adequately ventilate the area where the breakage occurred. Disposal of this lamp may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance (www.eiae.org).

To replace the battery in the remote control

1.Slide the remote control case open to reveal the battery compartment.

2.On the back of the remote control remove the battery cover 1 to reveal the batteries.

3.Remove the old batteries, and install two new AAA batteries 2.

4.Install the battery cover.

When discarding old batteries, contact your local waste-disposal provider regarding local restrictions on the disposal or recycling of batteries.

70

Reference Guide