Installation and Setup
To turn the projector on
1.Be sure the power cord is connected, and the main disconnect switch is turned on.
2.Remove the lens cap by pressing in on the tabs 1 on either side of the lens cap and pulling it straight out 2.
3.Press the power button 3 on top of the projector, or press the power button on the remote control.
The power button blinks while the projector warms up. When the lamp turns on, the power button stays on, and the projector searches for a signal.
4.Connect and power on the source, such as computer, handheld organizer, or DVD player. See “Making Initial Connections” on page 27 and “Connecting and Preparing” on page 43 for more information.
24 | Reference Guide |