System Management
To set up email for notifications
The projector can send email messages to specified recipients when certain critical events occur.
1.On a networked computer, open an internet browser, enter the IP address of the projector into the URL bar, and press Enter. See “To find the IP address” on page 53 for more information.
2.Click the Management tab, and on the left side of the screen, click Alerts.
3.Select one or more of the events that cause email alerts.
4.Enter the email addresses to receive the alerts.
5.Enter the IP address of the Simple Mail Transfer Protocol (SMTP) server used by the projector for outgoing email. The SMTP server relays messages to recipients.
6.Click Apply.
To protect configuration changes
1.On a networked computer, open an internet browser, enter the IP address of the projector into the URL bar, and press Enter. See “To find the IP address” on page 53 for more information.
2.Click the Networking tab, and on the left side of the screen, click Admin.
Account.3.Enter and confirm a password.
You must use this password for all access and configuration parameter changes. To disable the password, delete the password and leave the field blank.
4.Click Apply.
Reference Guide | 55 |