![](/images/backgrounds/288660/hp-pavilion-zd8000-users-manual-547218113x1.png)
Removal and Replacement Procedures
2.Disconnect the audio/USB board cable 1 from the system board.
3.Remove the PM2.0×6.0 screw 2 that secures the audio/USB board to the base enclosure.
4.Remove the audio/USB board cable from the base enclosure clips 3 through which it is routed.
5.Remove the audio/USB board 4.
Removing the Audio/USB Board
Reverse the above procedure to install the audio/USB board.
Maintenance and Service Guide |