Removal and Replacement Procedures
9.Position the notebook with the front panel toward you.
10.Flex the right rear edge of the base enclosure outward until the expansion port 2 is clear of the base enclosure 1.
11.Lift the front edge of the system board until it clears the base enclosure 2.
12.Slide the system board forward at an angle and remove it 3.
Removing the System Board
13.If necessary, remove the RTC battery from the socket on the system board.
Removing the RTC Battery
Reverse the above procedures to install the system board and the RTC battery.
Maintenance and Service Guide |