HP ZD8000 manual Disconnecting the TouchPad and LED Board Cables

Removal and Replacement Procedures

5.Turn the notebook top-side up with the front panel toward you.

6.Release the ZIF connector 1 to which the TouchPad cable is connected and disconnect the TouchPad cable 2 from the system board.

7.Release the ZIF connector 3 to which the LED/button board cable is connected and disconnect the LED/button board cable 4 from the system board.

8.Disconnect the display switch module cable 5 from the system board.

Disconnecting the TouchPad and LED Board Cables

5–32 Maintenance and Service Guide