Removal and Replacement Procedures
5.9 LED Board
Spare Part Number Information
LED board (includes cable) | |
|
|
1.Prepare the notebook for disassembly (refer to Section 5.3).
2.Remove the switch cover (refer to Section 5.8).
3.Release the zero insertion force (ZIF) connector 1 to which the LED board cable is connected and disconnect the cable.
4.Remove the PM2.0×4.0 screw 2 that secures the LED board to the top cover.
5.Lift the left side of the LED board 3 until the board disengages from the alignment pins 4 on the top cover.
Releasing the LED Board
Maintenance and Service Guide |
