Removal and Replacement Procedures

2.Disconnect the fan cable from the system board 1.

3.According to the 1, 2, 3, 4 sequence stamped into the heat sink module, loosen the four PM2.0×12.0 spring-loaded shoulder screws 2 that secure the heat sink module to the system board.

4.Lift the heat sink module and remove it 3.

✎Due to the adhesive quality of the thermal paste located between the heat sink module and processor, it may be necessary to move the module from side to side to detach the module from the processor.

Removing the Heat Sink Module

Reverse the above procedure to install the heat sink module.

Maintenance and Service Guide

5–55