1
2
There are three hooks which fix the antenna cover and bezel.
Insert to the gap and slightly pull upward from right to left to release the hooks.
Antenna cover is removed.
Remove two screws which fix the antenna to MB.
Screw
|
| Remove 6 screws which fixed the housing |
|
| and bezel. |
| 1 | There are two types of screw |
| 5 | |
| 2 | Screw 1~4 P/N |
|
| |
3 | 4 | 6 |
|
| Screw 5,6 P/N |
|
| Now separating the housing. |
|
| Use plastic stick to slide along the gap |
|
| (Right side of unit, near stylus hole) |
HTC confidential
© 2001, HTC Corporation. All rights reserved. | TOTAL 77 CONT.ON. 18 PAGE NO. 17 |
