Voltage > 2.5 V
Voltage should Exceed 2.5 V
Measured value should be within the
1.Current mesurement
It should have the value within + 3.125~
2.If value incorrect, need to Click “Calibrate Offset “ button first for double confirmation.
The value will be calibrated automatically. (it may takes about 15~ 20 seconds)
5- CC and DC status Check
Both Pin should be in LOW , otherwise it is judged as defective.
Following table is the criteria for Voltage and current status:
ITEM | Description | Measurement status |
1 | Battery VOLTAGE | Voltage should be 2.5 V Above. If the voltage is under 2.5, it |
|
| means that the battery is over discharged and defective. |
2* | Battery Current | Current should be between |
|
|
|
HTC confidential
© 2001, HTC Corporation. All rights reserved. | TOTAL 77 CONT.ON. 39 PAGE NO. 38 |
