8. The prompt “USB>” will appear , then to UPLOAD PDA Image , Type: USB>d2s 80000000

(means to upload PDA image code to SD card by typing d2s command, note there is a blank space between d2s and the address), then Press ENTER

The following display will be shown on PC display …..

The process begins and wait for 5 to 6 minutes until it shows Done.

HTC confidential

© 2001, HTC Corporation. All rights reserved.

TOTAL 77 CONT.ON. 57 PAGE NO. 56

Page 56
Image 56
HTC PDA PHONE II, Andes service manual Following display will be shown on PC display …