HTC ROSE100 Record with Audio, Flicker Adjustment, Prefix, Counter, Template Folder, About

	Experiencing Multimedia 171
Option	Allows you to
Record with Audio	Select On to record audio while capturing video clips. This is selected
(Video and MMS	On by default. If you select Off and then capture a video clip, it will
Video modes only)	have no audio.
Flicker Adjustment	When taking indoor shots, flicker on the camera screen may be caused
	by interference from fluorescent lighting. To reduce flicker, change the
	flicker adjustment setting to Auto or to the proper frequency (50Hz or
	60Hz) of the country where your phone is being used.
Prefix	Set a prefix to image or video filenames.
	When Default is selected as the prefix, the filename of each new
	captured file is set to “IMAGE” or “VIDEO” followed by a sequential
	number, for example: IMAGE_001.jpg. You may also choose to prefix
	filenames using either the current Date or Date & Time.
	Note: If you set the Camera to save captured photos to a storage card,
	the prefix cannot be selected. Captured photos will be named using
	the DCIM (Digital Camera Images) naming standard.
Counter	Select Reset to reset the naming counter to 1.
Template Folder	By default, templates are stored in the \My Documents\Templates
(Picture Theme	folder on the phone’s main memory. If you transferred some templates
mode only)	to a storage card (using File Explorer), set this option to Main + Card
	to specify that templates are located in both the main memory and
	the storage card.
Show Reminder	Select On to be prompted to set the picture to a contact after taking a
(Contacts Picture	contact picture. Select Off to disable the prompt.
mode only)
Recording Limit	Specify the maximum time or file size for recording video clips.
About	Display the Camera’s firmware information.