NETWORK SETTINGS
After executing the necessary QuickStart Wizard steps to set up and configure the Satellite IP Modem, you must select the Network Settings screen to complete your network configuration. On this screen, you enter the appropriate Domain Name Service (DNS) and the Access Point Name (APN) information given to you by your Service Provider.
;
Notes
Your Service Provider may have already performed this configuration step for you.
Your Service Provider must give you all the information necessary to complete these fields accurately. Do not attempt to input any of these settings without Service Provider information.
Whenever you modify the DNS addresses on the Network Settings screen, you must exit the Control Pad, exit the Launch Pad, reboot your computer, and power the Satellite IP Modem off and then back on so that the new settings can take effect.
Network Settings Screen
Use Static Public Network IP Address: If this box is not checked, the Satellite IP Modem uses an IP address automatically assigned by the network during the period when the Modem connects to
31 |
