CONTROLS AND INDICATORS
The figures below illustrate where the Control Buttons and Lights are located on the Satellite IP Modem and the functions of each.
POWER BUTTON
The Power Button turns the Satellite IP Modem power on and off. To turn on the Regional BGAN Satellite IP Modem, push the Power button down until the Power Light illuminates. To turn off the Satellite IP Modem, push the Power button down until the Power Light darkens (at least two seconds). The Modem will shut off a few seconds later.
When the Satellite IP Modem is first connected with the AC Main power, the Modem will power on immediately. Note that when the Satellite IP Modem is attached to AC Main power, the Modem still supports battery charging while the Modem is turned off.
POWER LIGHT
When the Satellite IP Modem is powered down, the Power Light is off.
Normal Operational Mode: The Power Light is green if the Modem is running on AC Mains power and flashing green if the Modem is on battery power.
Pointing Mode: The Power Light displays as one of two “switching colour” states related to GPS acquisition. If the Light is switching between red and amber, then the GPS location has not been updated since power up. If the Light is switching between amber and green, then the GPS location has been updated since power up.
In any mode, if the Power Light is flashing red, there is a fault or error in the Satellite IP Modem.
20 |
